Car & truck undercoating products. It's never "too late" to protect your vehicle from rust and corrosion. Fluid Film® will stop existing rust on contact. Save costly repairs on brake lines, springs, and rusting frames.
Call us:  866-811-8406 
How does Fluid Film® work ?              
Fluid Film®  protects all known metals by creating a non-drying barrier that seals out moisture and air. With the Fluid Film® barrier in place, existing rust will be stopped on contact, and new rust and corrosion cannot develop.Fluid Film® penetrates to the base metal, remaining active and migrating to inaccessible areas. Fluid Film® provides long term protection from the corrosive effects of salts, calcium chloride, moisture and fertilizers.

It does not dry ? Won’t it wash off ? 
Fluid Film® embeds itself in the pores of the metal, and does not wash off easily. Fluid Film® undercoating is a thick and durable formula. It is about the viscosity of a latex paint. Fluid Film® is an annual application. Apply Fluid Film®  before the winter season, and your vehicle will be protected against corrosion for 8 – 12 months in most winter environments.

If it stays wet, won’t dirt stick to the bottom of the car ?                                    
Because Fluid Film® remains wet, it will get an initial dusting upon application, but be-cause it contains no solvents and will not become sticky, it will not gum up or create a build-up of dirt.

What’s the big deal about “solvent free” ?                                                    
Fluid Film® products are solvent free and consist of an all natural lanolin base. Without solvents, Fluid Film® will not dry out or evaporate. When applied inside an enclosed environment, such as inside vehicle doors, inside frame tubes, etc., Fluid Film® will continue to provide protection for an indefinite period of time (years). As an example, think about the product called WD## which is over 50% mineral spirits, according to their technical data. What happens with mineral spirits, alcohol, and similar chemicals when you spill them? They evaporate. These products work well. They penetrate, do their job, loosen the bolt, or get rid of the squeak, and evaporate very quickly. Fluid Film® on the other hand, with no solvents, will penetrate the area, and will not dry out or evaporate. Fluid Film® will continue to provide an indefinite period of protection and lubrication in that same area.

If it stays wet, will it drip on my drive-way and on the garage floor ?
No. Fluid Film® is a non-drip, non- tacky, self- healing formula.

Why would I want to have my car undercoated every year with Fluid Film®, instead of a traditional hard-shell undercoating ?                                             
Hard undercoating is generally 3-4 times the cost of a Fluid Film® application. The downside to hard undercoating is with time these tend to chip and crack. The protection is lost as moisture and road salt enters these openings and gets trapped between the hard shell and the vehicle undercarriage. Corrosion will thrive in this environment and you cannot see it until it is too late because it is hidden under the cracked hard shell.  Fluid Film® is a cleaner, less expensive and more effective alternative.

Can I still wash my car without washing off the Fluid Film® ?                            
Yes. Fluid Film® does not wash off easily. Just avoid the high pressure wash on the undercarriage of the vehicle. A low pressure rinse is fine.

How much pressure is needed for your spray gun applicators ?
70 - 90 psi works fine. These Fluid Film spray guns do not require much pressure to operate.

                                                            Call us:  866-811-8406

2012 Your Web Site Corporation. All rights reserved.